信号质量分析仪-R

MP1900A

MP1900A系列是一款8插槽模块化高性能BERT，支持NRZ和PAM4以及PCI Express/USB等总线接口的高速网络接口的一体化物理层测量

索取报价

下载

概述
规格
应用
资料库

Overview

描述
功能

为了满足在智能手机和移动终端普及下迅速膨胀的数据流量，数据中心网络接口正转向成为更快的200 GbE, 400 GbE 和800 GbE标准。通信设备互连不但已开始采用支持速度更快且高达32 Gbit/s的PCI Express Gen5，也开始采用了多通道技术。
安立的信号质量分析仪-R MP1900A系列是一款具备8个模块插槽的高性能BERT，通过PPG/ED、及抖动/噪声发生器等扩展测量应用，从而支持更快速度设备以进行信号完整性分析。除了针对宽带网络接口的物理层测量功能外，一体化的MP1900A还支持了PCI Express总线等接口的测量。

支持应用
100 GbE / 200 GbE / 400 GbE / 800 GbE，CEI-25G / 28G / 56G / 112G，InfiniBand EDR / HDR，光纤通道，PCI Express Gen1 / 2/3/4/5，Thunderbolt 1/2/3，USB3 .2 / 4 Type C，SAS-3 / -4，DP1.4，光模块，SERDES，AOC，高速互连

Anritsu MP1900A BERT for Ethernet and PCI Express of data-center

PAM4测试方案

最大传输容量为512 Gbit / s
PAM4 PPG/ED (MU196020A/MU196040A)
Baud rate of 2.4 to 64.2 Gbaud^*1
多通道可扩展性 4ch PAM4/NRZ  NEW
高速Tr / Tf 8.5 ps（20 - 80％）
低残余抖动数据输出170 fs rms（典型值）
高质量数据输出，低噪声，低失真
4抽头强调（可变范围20 dB）
ISI调整功能  NEW
FEC模式生成功能  NEW
Stressed裕度BER < E-12^*2
內部時鐘恢復
PAM 4模式编辑器，符号错误测量
抖動，校樣強度測量功能（SJ / RJ / BUJ / SSC）
电压噪声附加功能(Common/Differential/White Noise)
使用DUT BER计数器功能测量抖动容限 NEW

*1: ED（超過32.1 G）將來會得到支持
*2: 符合CEI標準的PAM 4波形輸入了的时候

PAM4 Solution (Max. 64 Gbaud at 1CH)

高速串行總線接口測試解決方案 (PCI Express, USB, Thunderbolt)

传输容量最大512 Gbit/s，一个主框架最多可扩展至16ch（配备8个32 Gbit/s 2ch PPG插槽）
一体化支持高速网络、PCIe等总线接口或双向测试
新宽带32 Gbit/s SI PPG/ED（MU195020A/MU195040A）
- 比特率2.4 Gbit/s到32.1 Gbit/s
- 支持NRZ/PAM4
- 10阶加重
- 可变ISI功能
- 多频段CTLE（8 Gbit/s、16 Gbit/s、28 Gbit/s带宽）
- 随机抖动的内部抖动输出低至115 fs rms（典型值）
- 高灵敏度的数据输入，典型值达15 mV（眼高）
- 可选1ch/2ch
PCI Express链路训练、LTSSM分析（使用MU195020A/MU195040A/MX183000A-PL021）
USB 链路训练、LTSSM分析（使用MU195020A/MU195040A/MX183000A-PL022）
增加抖动和测量抖动容限功能（SJ/RJ/BUJ/SSC，使用MU181500B/MX183000A-PL001）
电压噪声增加功能（普通、差动式、白噪声，使用MU195020A/MU195050A）

NRZ Solution (Max. 32 Gbit/s at 1ch)

↑ BACK TO TOP

规格

浏览数据表 UPDATED

主要规格

Signal Quality Analyzer-R MP1900A

项目	规格
LCD显示屏	12.1英寸，WXGA 1280 x 800
远程接口	GPIB、LAN
模块插槽	8
外围设备I/F	USB x6，VGA x1，HDMI x1
操作系统	Windows Embedded Standard 7
功率	100 Vac至120 Vac /200 Vac至240 Vac 50 Hz至60 Hz
功耗	最大1350 VA
尺寸和重量	340 (W) x 222.5 (H) x 451 (D) mm/最大20 kg (不含模块)

Noise Generator MU195050A

项目	规格
通道数	2
插入损耗	-3 dB
CMI	0.1 GHz至1 GHz/1 GHz至6 GHz
DMI	2 GHz至10 GHz
白噪声	10 MHz至10 GHz
波峰因数	>5

PAM4 PPG MU196020A

Item	Specification
Operation Rate (PAM4/NRZ)	2.4 Gbaud to 32.1/58.2/64.2 Gbaud (option selection)
No. of Channels	1
Output Amplitude	70 mVp- to 800 mVp-p (Single-end) 140 mVp- to 1600 mVp-p (Differential)
Offset	-2 V to +3.3 V
Emphasis	4 Tap, -20 to +20 dB
Channel Emulator	Generates waveform with insertion loss and simulates waveform with corrected insertion loss Set by loading S-Parameter file (S2 P, S4 P)
ISI	Simulates ISI generation waveform Set using loss (–8.00 to 8.00 dB) at CEI-specified Nyquist frequency Used in combination with channel board, such as J1800A/J1758A (optional accessories parts), or Noise Module MU195050A
Independently Variable PAM4 3 Eye	20 to 50% (PAM4 Amplitude 0/3 level = 100%)
PAM4 Pattern	SSPRQ, PRBS13Q, PRBS31Q, RS-FEC, etc.
PAM4 Pattern Error Addition	MSB Error, LSB Error, LSB&MSB Error, RS-FEC Symbol Error
Tr/Tf (20 to 80%)	8.5 ps (typ., NRZ)
Random Jitter	170 fs rms (typ., NRZ)
I/O Connector	V (f)

PAM4 ED MU196040B NEW

Item	Specification
Operation Rates (PAM/NRZ)	2.4 to either 32.1 Gbaud, or 58.2 (PAM4)/64.2 (NRZ) Gbaud (option selection)
No. of Channels	1
Input Amplitude	NRZ: ≤32.1G: 0.05 to 1.0 Vp-p; >32.1G: 0.1 to 1.0 Vp-p PAM4: ≤32.1G: 0.3 to 1.0 Vp-p; >32.1G: 0.4 to 1.0 Vp-p
Input Sensitivity (Eye Height)	NRZ: 19 mV @ 26.5625 Gbaud; 21 mV @ 53.125 Gbaud PAM4: 23 mV @ 26.5625 Gbaud; 36 mV @ 53.125 Gbaud
Clock Recovery (Option)	2.4 to 32.1 Gbaud; 51 to 58.2 Gbaud
Equalizer (Option)	Low-frequency Equalizer (≤1 GHz, 2 dB typ.) + DFE (1.4 dB typ.)
PAM4 Patterns	SSPRQ, PRBS13Q, PRBS31Q, etc.
PAM4 Counter	MSB, LSB, Symbol 0 to 3 (Option)
Input Connector	V (f)

21G/32G bit/s SI PPG MU195020A

项目	规格
Operation Bit Rate (NRZ)	2.4 Gbit/s至21 Gbit/s或32.1 Gbit/s
通道数	1或2
输出振幅	0.1 Vp-p至1.3 Vp-p (单端式) 0.2 Vp-p至2.6 Vp-p (差动式)
加重	10阶
Channel Emulator	Normal：从S参数模拟插入损失 Inverse：对S参数的插入损失进行De-Emphasis补偿 S-Parameter file: S2P,S4P
ISI	通过CEI-28G/25G的奈奎斯特频率的损失设置模拟输出ISI 通过与应用零部件J1758A ISI Board配套可控制损失 Insertion Loss设置：1.5～25 dB 0.01 dB step @Nyquist Frequency 0～25 dB 0.01 dB step @1/2Nyquist Frequency
Tr/Tf (20%至80%)	12 ps (典型值)
随机抖动	115 fs rms (典型值)
PCI链路训练	支持(MX183000A-PL021/PL022/PL025)
Output Connector	K (f)

21G/32G bit/s SI ED MU195040A

项目	规格
工作比特率 (NRZ)	2.4 Gbit/s至21 Gbit/s或32.1 Gbit/s
通道数	1或2
输入振幅	0.05 Vp-p至1.0 Vp-p (单端式) 0.1 Vp-p至2.0 Vp-p (差动式)
输入灵敏度 (Eye Height)	15 mV (眼高 28.1 Gbit/s) 30 mV/Eye（28.1 Gbaud, PRBS15, PAM4）
CTLE	峰值频率14, 8, 4 GHz 增益0至-12 dB
时钟恢复	是，支持SSC
PCIe and USB链路训练	支持(MX183000A-PL021/PL022/PL025)
Output Connector	K (f)

可在MP1900A中使用MP1800A系列模块。详情请参阅MP1900A选择指南。

↑ BACK TO TOP

MP1900A 系列分析仪适用于：

Tektronix and Anritsu Solution
PCI Express 5.0 Test System (NEW)

High Speed PAM4 BER Measurement Solution

PCIe, USB, Thunderbolt Receiver Test Solution
All-in-One PCIe Gen1 to Gen5 Support

Teledyne LeCroy and Anritsu Solution
PCI-Express and Type-C Interface Test System

相关链接

资料库

产品手册

产品手册	发布日期
Signal Quality Analyzer-R MP1900A - 32G/64G NRZ/PAM4 Signal Integrity Test Solution	2021/3/11
Signal Quality Analyzer-R MP1900A - PCIe/USB/Thunderbolt Test Solutions	2020/11/24
Optical & High-speed & Transport Testing Solutions	2020/4/21

技术指标

技术指标	发布日期
Signal Quality Analyzer-R MP1900A	2021/3/11

应用指南

应用指南	发布日期
Anritsu Automotive Solution - PCIe® Receiver Test by MP1900A series	2021/2/18
PCI-Express Generation 4 RX Test Solution	2018/6/13
Best Practical Jitter Tolerance Testing with MP1900A	2018/4/17
Method for Evaluating Clock Recovery Tolerance to Contiguous 1s and 0s	2017/8/1
为消除ESD和EOS故障的测量环境对策	2017/3/30

产品简介

产品简介	发布日期
FEC Analysis MU196040B-x42 / PAM4 ED MU196040B	2021/3/11
58 G/64 Gbaud Multichannel PAM4 BERT - PAM4 PPG MU196020A / PAM4 ED MU196040B	2021/3/11
Signal Integrity Analysis Multi-Channel High-Performance BERT	2020/11/12
High-Speed Serial-Bus Interface Solution PCIe 5 Support	2020/3/4

传单

传单	发布日期
Retrofitting Opt-3xx Series to MP1900A SQA-R	2021/3/17
FEC Based 400/800 GbE PAM4 Signal Jitter Tolerance Test - FEC Analysis/FEC Symbol Capture Functions	2021/3/11
Pick OFF Tee J1793A (V-connector), J1510A (K-connector)	2020/12/23
DisplayPort^TM Receiver Test Solution	2020/10/8
Serial Attached SCSI (SAS) Receiver Test Solution	2020/10/8
PCI Express 5.0 Receiver Test Solution	2020/10/8
FEC Symbol Capture Function for Evaluating 400 GbE FEC Symbol Errors	2020/7/6
800 GbE BER Evaluation 64 Gbaud Multichannel PAM4 BERT	2020/6/30
USB4^TM and Thunderbolt^TM 3 Receiver Test Solution	2020/6/23
Controlling Measuring Instruments with Embedded Windows from Home	2020/5/25
Anritsu Automotive Product Lineup: Test Expertise for the Future of Transportation	2020/2/12
PCI Express 5.0 Automated Physical-layer Testing	2019/11/25
Jitter Tolerance Test Using Multi-channel FEC Patterns	2019/8/30
PPG with Built-in ISI and Channel Emulation Functions	2019/5/8
400G PAM4 Solution	2019/2/25
PCI Express Gen4/5 Receiver Test Solution	2018/6/13
Automated Physical-layer Testing for PCI Express - PCI Express 4.0 Tx Rx Test Solution	2018/6/13
PCI Express Automated Physical-Layer Testing - PCI Express Test Solution	2018/6/4
Signal Integrity Analysis Multi-Channel High-Performance BERT	2018/3/5
USB 3.1 Gen1/Gen2 Receiver Test Solution	2018/2/20
PPG with Built-in Variable ISI and Channel Emulation Functions	2017/12/5
ESD Protection Adapter J1678A, J1679A	2017/7/14

技术说明

技术说明	发布日期
Proper Bias-T Usage to Avoid PPG Damage	2017/7/14
Trends and Issues in Ultra-High Speed Transmission Technologies	2017/7/14
Selecting Tools at Measurement of High-Speed Digital Signals	2017/7/14
Effect of Transmission Line Length on BER Testing	2017/7/14

白皮书

白皮书	发布日期
Anti-Virus Measures for Instruments with Windows Operating System	2019/12/26

选择指南

选择指南	发布日期
Signal Quality Analyzer-R MP1900A series Selection Guide	2021/3/11

快速启动指南

快速启动指南	发布日期
Adjustable ISI MU196020A-040	2019/2/25
MP1900A USB3.1 Test Solution	2018/3/14
Variable ISI MU195020A-040, 041	2018/2/21
MP1900A 32 Gbaud PAM4 Solution	2018/2/19
64Gbaud PAM4 DAC G0374A	2018/1/23

操作手册

操作手册	发布日期
MP1900A Signal Quality Analyzer-R Operation Manual	2021/3/11
MU196020A PAM4 PPG MU16040A PAM4 ED MU196040B PAM4 ED Operation Manual	2021/3/11
MX190000A Signal Quality Analyzer-R Control Software Operation Manual	2021/3/11
MU195020A 21G/32G bit/s SI PPG MU195040A 21G/32G bits/s SI ED MU195050A Noise Generator Operation Manual	2021/3/11
MX183000A High-Speed Serial Data Test Software Operation Manual	2021/3/11
MU181000A 12.5 GHz Synthesizer MU181000B 12.5 GHz 4 port Synthesizer Operation Manual	2020/9/30
MU183020A 28G/32G bit/s PPG MU183021A 28G/32G bit/s 4ch PPG Operation Manual	2020/9/30
MU181500B Jitter Modulation Source Operation Manual	2020/9/30
MU183040A 28G/32G bit/s ED MU183041A 28G/32G bit/s 4ch ED MU183040B 28G/32G bit/s High Sensitivity ED MU183041B 28G/32G bit/s 4ch High Sensitivity ED Operation Manual	2020/9/30

图像

视频

Enhanced Testing With Effective FEC Functions
Overview of FEC feature of the MP1900A

Explanation of Anritsu MP1900A USB4 Test Method
Explains MP1900A USB4 test method

Anritsu MP1900A PCIe Electrical Test Overview
Anritsu and Teledyne LeCroy offer a PCIe Compliance Test solution to reduce testing workloads by fully automating increasingly complex Compliance Test items.

Anritsu MP1900A Receiver Link Equalization Calibration Procedure
This video explains more about the most complex Rx Link Equalization part of the MP1900A Compliance Test.

Anritsu MP1900A Receiver Link Equalization Test Procedure
This video explains about Receiver Link Equalization Test Procedure of the MP1900A.

Anritsu IoT measuring instruments
Anritsu IoT measuring instruments: IoT,Testing,Test Solution, IoT Products,RF/Wireless Components Conformance Test, 5G IoT and High Speed Devices.

Signal Quality Analyzer-R MP1900A PAM4 Solution
The Signal Quality Analyzer-R MP1900A series of high-performance BER testers (BERT) is designed to measure 400GbE and future 800GbE interfaces

Signal Quality Analyzer-R MP1900A
The Signal Quality Analyzer-R MP1900A series is a high-performance BERT with excellent expandability for supporting Physical layer evaluations.

如何防止 ESD 和 EOS 损坏测量仪器和 DUT
在这个视频里，我们会介绍为了防止ESD及EOS损坏被测物体或者测量仪器的注意事项。