The MX280005A vector signal analysis (VSA) software supports all common digital wireless modulation standards. Fast and accurate measurements make it ideal for R&D as well as early rollout of digital radio equipment and components. P/N: 11410-02844
产品手册
pdf 1.6 MB
Version: B
2021/4/7
The New Radio RF Conformance Test System ME7873NR is a RF Conformance Test (RFCT) platform for RF transmitter / receiver characteristics, performance requirements, and RRM testing of 5G mobile devices compliant with 3GPP standards. Based on the solid and trusted achievements selected and used by customers around the world in the 3G (W-CDMA) and 4G (LTE) era, we will continue to release timely test cases for 5G.
产品手册
pdf 2.4 MB
2021/3/22
With a built-in BERT (for Bit Error Rate measurements) and a sampling oscilloscope (for Eye pattern analysis) the All-in-one BERTWave MP2110A is optimized for manufacturing 100 GbE and 25 GbE optical modules.
The BERTWave MP2110A will improve optical module production efficiency and reduce manufacturing costs.
产品手册
pdf 6.2 MB
2021/3/17
The introduction of transport module that can be mounted on MT1000A.
The MU100010A and MU100011A provide functions and performance at speeds from 1.5 Mbps to 10 Gbps, and from 10 Mbps to 100 Gbps, respectively, for installing and maintaining communications networks.
产品手册
pdf 6.8 MB
2021/3/15
The Network Master Pro MT1000A with optical-fiber event detection is an all-in-one multifunctional handy tester for data quality analysis of Ethernet, OTN, CPRI, etc., networks. With clearly visible 9-inch touch-panel, compact on-site portability in one hand, and easy operation, it has all the functions needed for network installation and maintenance while being convenient to manage and use.
产品手册
pdf 5.4 MB
2021/3/15
The MU100020A/MU100021A/MU100022A are OTDR modules for the MT1000A Network Master Pro platform, which
incorporates an OTDR, light source, optical power meter, and visible light source into one set. In addition,
simultaneous installment of the 10G/100G Multirate Module MU100010A/MU100011A supports OTDR/CPRI measurements
in strong demand by the mobile fronthaul market.
产品手册
pdf 4.1 MB
2021/3/15
The all-in-one portable MT1040A tester for 400G Ethernet also supports up to 100G Ethernet and OTN networks. Installing the OTDR module enables optical-fiber continuity tests as well. This Catalog describes typical MT1040A use cases as well as ordering information.
产品手册
pdf 4.4 MB
2021/3/15
Data center and network traffic volumes are increasing exponentially as mobile networks start upgrading to 5G and ‘Big Data’ applications become popular. As a consequence, physical-layer devices are required to support faster transmission speeds, larger data capacities, and assured signal quality, in turn making signal integrity analysis ever more important. To meet these needs, Anritsu has implemented more accurate signal integrity tests, such as bit error rate (BER) measurements, crosstalk tests, Jitter Tolerance tests, etc., in its MP1900A test solution for 32G/64G NRZ/PAM4.
产品手册
pdf 5.6 MB
2021/3/11
The Site Master S331E and S361E is a handheld cable and antenna analyzer designed to make
Return Loss, VSWR, Cable Loss, and Distance-To-Fault (DTF) measurements in the field. P/N: 11410-00516
产品手册
pdf 13.8 MB
Version: V
2021/3/11
The Site Master S331L is a one-port, 2 MHz to 4 GHz hand held cable and antenna analyzer designed to make Return Loss, VSWR, Cable Loss, Distance-To-Fault (DTF), and power measurements in the field. P/N: 11410-00640
产品手册
pdf 14.5 MB
Version: L
2021/3/11
The Site Master S331P is the lightest, smallest, and fastest of this family. Addressing the market need for broad frequency coverage and high performance in an extremely compact and economical design, the Site Master S331P provides wireless operators and contractors, DAS installers, and public safety network installers and maintenance professionals with the first pocket-sized headless cable and antenna analyzer that can measure the new LTE-U frequencies. P/N:11410-00978
产品手册
pdf 12.0 MB
Version: J
2021/3/11
The Microwave Site Master S820E is a handheld cable and antenna analyzer designed to make measurements in the field on both coaxial cable and waveguide transmission lines. Cable and antenna analyzer measurements include 1‑port Return Loss, Cable Loss, VSWR, Distance‑To‑Fault (DTF), Transmission, Smith Chart, and phase measurements. P/N: 11410-00780
产品手册
pdf 11.2 MB
Version: F
2021/3/9
Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
产品手册
pdf 14.5 MB
Version: AB
2021/3/9
The PIM Master MW82119B with Site Master option provides an integrated test solution capable of certifying both PIM and
line sweep performance with a single test instrument. The PIM Master MW82119B solution offers the same ease-of-use,
ruggedness, and familiar menus as its predecessor, along with new features to enhance productivity and speed site testing. P/N: 11410-00824
产品手册
pdf 8.1 MB
Version: L
2021/3/9
2 page overview of the key specifications, optional accessories, and ordering information for the PIM Master. P/N: 11410-00831
产品手册
pdf 1.1 MB
Version: F
2021/3/9
Signalling Tester MD8475B is a base station simulator reproducing communications between base stations and UEs. It supports the full range of communication standards including 2G to LTE-Advanced, and multiple applications such as VoLTE, WiFi Offload etc. Its scenario-less GUI SmartStudio can simplify the test environment construction, assuring efficient tests of UEs become complicated.
产品手册
pdf 6.7 MB
2021/3/8
Quick overview of the key specifications, features, and options that the Field Master Pro offers. P/N: 11410-01104
产品手册
pdf 848.1 KB
Version: L
2021/3/2
The Field Master Pro MS2090A device delivers the highest levels of RF performance available in a handheld, touchscreen spectrum analyzer. P/N: 11410-01103
产品手册
pdf 18.1 MB
Version: N
2021/3/2
LTE-Advanced RF Conformance Test System ME7873LA automates RF and RRM
tests for mobiles supporting the latest 3GPP standards.
In addition to supporting LTE/LTE-Advanced test standards and also legacy W-CDMA,
ME7873LA follows the LTE-A newer standards quickly.
Possible to customize system configurations for customer demands and provide useful R&D test functions.
产品手册
pdf 2.0 MB
2021/2/26
Radio Communication Test Station MT8000A supports both 5G NR RF measurements and protocol tests in sub-6 GHz and millimeter wave bands with the base station emulation function. Moreover, it supports not only 5G SA (Standalone) but also NSA (non-Standalone) mode with the customer's existing LTE measurement assets.
产品手册
pdf 3.9 MB
2021/2/24
